It was the turn of century. A year when Harry Potter had made its debut in the film as well as the Nokia 3310 was the #1 selling cell phone in the world, and “Oops!” Britney, repeated the feat. The year 2000 brought an array of highs and post-Y2K hyper-stress, one of which included Sony’s PlayStation 2.

Sony’s latest attempt at family console wars became a massive success immediately, standing tallest among the other consoles in the market: Sega’s Dreamcast Microsoft’s Xbox the Nintendo GameCube. The design featured the ability to play DVDs, backwards compatibility, and an incredible selection of exclusive games by 2011 , it was going into the market with more than 150 million units all over the world. Additionally, it still holds the record for the highest-selling gaming console of all time.

So, my dear reader, allow me to brighten up your day with some much needed great news. I’m here to tell you that with the magic of emulators you are able experience all your favorite games from the past. That, of course, includes PlayStation 2. Sony PlayStation 2.

Let’s talk about Emulators

The primary task of an emulator is to emulate, gaming consoles thus permitting PC (and in the present, Android) players to enjoy games they played on their consoles of old. That means that people who don’t need a console at all to dive into the large collection of games that the PlayStation 2 originally about it from Our Articles

By using the included software, emulators can read and project an image from a game’s disc onto your laptop and utilize it as a storage device and display. The amount of information stored on your system by both ROMs and the emulator (more about these later) is only limited by the space on your hard drive. There are even replica controllers available to pair with your PC to make it feel more realistic to what you would get from a real controller!

Choosing An Emulator

It’s no problem to locate an emulator. There’s plenty available on the internet for download. But, a lot of them tend to be really poor in quality and appearance. It’s important what makes one that is worth downloading, and the others which can be easily overlooked.

It’s a good thing that you’re likely to be joining the party of emulators slightly late. All the heavy lifting has been done for you by other gamers who’ve had the chance to give them a try run. The popularity of a couple seem to speak for themselves when it comes to the quality and trust. PCSX2, Damon PS2, and Gold PS2 are among the most prominent options for your PC and Android device. For stability and graphics settings you’ll be hard-pressed to find a better choice.

Installation, Download & Install An Emulator

Being among the oldest and more stable PS2 emulators I’ll guide you through the steps of installing my favorite emulator that is PCSX2. PCSX2 is a no-cost PlayStation 2 emulator that allows users to choose resolutions with a range of up at 4096×4096. There is also texture filtering and anti-aliasing that makes older PS2 games look better than the current HD remakes. Additionally, it also comes with an inbuilt HD video recorder that can assist you in creating new memories which can be recorded using video.

To ensure that the PCSX2 is running smoothly on your PC, here are the recommended and minimum system requirements:


  • Windows (or Linux OS
  • The CPU has to be able to support SSE2 (Pentium 4+ Athlon64+)
  • The GPU must be compatible with Pixel Shader Model 2.0, not Nvidia FX series
  • Minimum 500MB RAM (Vista users will require 2GB)


  • Windows Vista/7 (32bit or 64bit) with the latest DirectX
  • CPU: Intel Core 2 Duo @ 3.2 GHz or better OR i3/5/7 @ 2.8 GHz or better OR AMD Phenom II @ 3.2 (GHz) or better
  • A GPU with 8800GT or greater
  • RAM: 1GB on Linux/Windows XP, up to 2GB+ in Vista/7.

Operating the emulator at the lowest system requirements could create extreme lag for higher-end GPU and CPU games.

To begin:

  1. Download the latest version of PCSX2 specially designed to work with your operating system. You should always try to find the latest “stable” release for downloads as it’s less susceptible to cause issues.
  2. If you’re already using the PS2 console that is physically in your possession, PlayStation 2 console, you’ll require your BIOS from the console. The PS2 BIOS differs from your PC’s BIOS during boot up. PCSX2 has no BIOS as it is a Sony copyright and it is in violation of the law. To download any BIOS file from your PlayStation 2, head here and download the latest version of BIOS Dumper that you prefer. You’ll also be able to find a hyperlink for a forum thread to assist you on how to remove your BIOS.

    • The PCSX2 emulator and any other PS2 emulator, cannot run without a PS2 BIOS. If you are in need of one, consider piracy as there are many sites that offer an PS2 BIOS version. AppNee compiled a whole listing of BIOS compatible with almost all PS2 emulator currently on the market. They even have all models and regions from PlayStation 2 as well. This is probably the more user-friendly and less intrusive alternative.
  3. Install PCSX2 by using the .exe file you received after downloading.
  4. The first screen that pops up will be”Choose Components. “Choose the Components” screen. Click Next.
  5. This is followed by next step: the Visual C++ box. You must check the “I agree with the license and conditions” box and click Install. PCSX2 should now be installed.
  6. Search for the PCSX2 folder on your start menu (or the desktop if there is the folder there) and double-click the executable.
  7. The first time configuration page opens and provides the user with welcome messages. There is an option to select a language selection and links to our online tutorial on configuration and Readme PDF. It’s possible to leave out all of this if you want and instead go to Next.
  8. Following the page you will pull open a number of drop-down menus. Each of them represents PCSX2’s plugin. I recommend that you use the defaults before clicking the Next button again.
  9. Here’s where it’s necessary to enter the BIOS information. Locate the BIOS file in the directory you chose after ripping it earlier in Step 2. When you’ve found (or copied) click the Refresh list button, and then select your BIOS rom in the window. When you’re done moving forward, click Finish to complete the process.

The emulator is now in place but to be able to use it, you’ll need to first configure the controls. You are able to (and ought to) make use of a gamepad, if you have one. This could include a PS3, PS4, or even an Xbox 360 controller. It’s not a good idea to settle for your keyboard. The frustration will never end and honestly, it just doesn’t feel right.

Launch PCSX2:

  1. You can click on for the “Config” tab and from the drop-down menu select “Controllers (PAD)” then “Plugin Settings …”.
  2. There will be three different tabs “General”, “Pad 1″,”Pad 1”, as well as “Pad 2”. Pad 1 And 2 are the players, so you should move to “Pad 1” to get your controls in place.
  3. The buttons you’ll have to set up can be found on the right. Simply click on a button click the button (on keypad) or the key (keyboard) it is your intention to change it’s settings to. All the buttons that you’ve configured will show on the “Device/PC Control/PS2 Control” panel.
  4. After you’ve finished setting up your keybindings. You can opt to configure the second one if you’d like. If not, select OK.

Let’s Talk about ROMs

After the emulator has been taken over, we’re ready to move on to the fun part. For those of you who still have your first PS2 game discs you’ll be thrilled to know that the emulator will play them just like it were an actual PlayStation 2. Just plop an PS2 DVD into the drive for your disc, go to the “System” tab within the PCSX2 emulator, then click “Boot CDVD (full)” and begin gaming.

However, if you’re like me and no longer have any of the originals (or you want to play some games that you don’t have) it’s necessary to download Roms. These ROMs, which are also known as Read-Only Memory, can be obtained from numerous PS2 enthusiasts’ websites like UberUpload, CoolROM, and ROMHustler. Each has plenty of ROMs to choose from to pick from to scratch that nostalgia. The files you download are versions of the original Sony PlayStation 2 games of older. They are just compressed versions of them that are more easily accessible than the original discs.

How you use these ROMs is up to you. They are usually either .iso or .rar file format. Windows 10 allows you to load .iso files directly, without the requirement of a third-party software or burned DVD/CD. If you’re using other versions, you’ll need third-party programs such as Daemon or MagicISO which can run ROMs on your PC as well as ImgBurn use ImgBurn to write .iso files to an CD. For .rar archive files, it is possible to could try using it directly inside the emulator to check whether it’s functioning. If not, you’ll have for you to remove the .rar archive with an application for opening files (WinZip 7, 7Zip) in your emulator, then launch it and open the copied file.

Playing playing ROMs

After downloading an .iso game file, we’re able to jump right in to the action. What you’ll need to do is:

  1. Inside within the PCSX2 emulator, click on”CDVD” “CDVD” Tab menu. Select “Iso Selector” and, if the .iso has been loaded the game should be there to clickon. If not select browse… after which look for the .iso file for the game.

    • It’s highly recommended to ensure that all you .iso files are saved in a single folder for easy access.
  2. After the .iso file has been loaded, click on the “System” tab, then select Boot/Reboot CDVD.
  3. The game will then start playing and will be playable.

Are you having problems with your hair?

Setting this all up can be quite difficult and it’s not uncommon to run into a few problems. Are your games running too slow? This could mean that your PC is not compatible. be sure to verify the recommendations of your system against your actual PC model.

Another problem could be that the game you want to play is not yet supported by PCSX2. There is a list of compatible games that you can review to determine whether your game is included on the list. If you don’t see your game listed then it’s because it’s not had a chance to be tested yet. If you’re not sure, go to the PCSX2 forums and let them know. This is also a great forum to ask for help in the event of any difficulties running the emulator.

The game’s source file could be unsuitable as PCSX2 allows .iso, .bin, .img, .mdf, and .nrg files. It’s also possible that the game’s content could be damaged or corrupt in any way. To discover this, you’re better off downloading a new file from another site and testing it.

If you are getting the “CDVD plugin could not open. Your computer might have insufficient resources, or drivers are incompatible with the hardware” error, this means that PCSX2 malfunctioned during a forced shutdown. To correct this issue, you’ll have the need to force close it again and choose the appropriate graphics plugin.

To close the door:

  1. Head to your Task Manager by either right-clicking the taskbar and selecting it from the list or pressing CTRL+ALT+DEL simultaniously and choosing Task Management from the options displayed on screen.
  2. From here, locate the PCSX2 task running in the “Processes” tab Highlight it, then select the end task button. When the pop-up is displayed.
  3. Shut down Task Manager and run PCSX2 again.
  4. Open the “Config” tab and click”Configure… That will bring up the “Configuration” window.
  5. Select a brand new graphics plugin to select from the “Graphics” drop-down. Then click OK.
  6. Attempt to run your file once more. The file should show as normal without the annoying warning popup.